Sharp WF-1000W boombox

Description

Sharp WF-1000W(BK)
Cleaning
Replaced rubber belts
Lubrication according to regulations
Fully functional Has traces of exploitation (see photo)
Antenna refurbished by the seller
There is no latch on the left speaker system
(the ability to attach to the main unit is preserved)
The sound is very juicy, the bass is very pleasant to the ear
Confident stereo reception of FM programs
SPECIFICATIONS:
General Power source:
AC 110-127 V/220-240 V, 50/60 Hz DC 15 V
["D" size (UM/SUM-1, R20 or HP-2) battery × 10]
Power consumption: 28 W
Output power: PMPO 200 W (total) (AC operation)
MPO 50 W (25 W + 25 W) (AC operation, 10 % T.H.D.)
RMS 25 W (12.5 W + 12.5 W) (DC operation, 10 % T.H.D.)
Input terminal:
Mixing microphone
600 ohms CD/LINE
350 mV/47 kohms
Output terminal:
Headphones 16-50 ohms (recommended; 32 ohms)
Dimensions:
Width; 300 mm (11-13/16") Height;
240 mm (9-1/2") Depth; 220 mm (8-11/16")
Weight:
3.8 kg (8.4 lbs.) without bat
[1]
teries
Radio section
Frequency range: FM 88 - 108 MHz
SW1 2.3 - 7.3 MHz
SW2; 7.3 - 22 MHz
MW 526.5 - 1,606.5 kHz
Tape recorder section Frequency response:
60 - 12,000 Hz (Normal tape)
Signal/noise ratio:
40 dB (TAPE 1, recording/playback)
55 dB (TAPE 2, playback)
Wow and flutter:
0.15 % (WRMS)
Motor:
DC 9 V
electric governor
Bias system
AC bias Erase system:
Magnet erase
Speaker section Type:
2-way type Speakers: 12 cm (4-3/4")
free-edge speaker × 2 Tweeter × 2
Impedance:
8 ohms
Dimensions:
Width 235 mm (9-1/4")
Height 262 mm (10-5/16")
Depth 220 mm (8-11/16")
Weight: 1.8 kg (4.0 lbs.)/each